| Brand: | TD47 Products |
| Model: | Heat-shrink tubing H-5R (4x) |
| Shrink ratio: | 4:1 |
| Unshrunk diameter: | 24.0 |
| Diameter, crimped: | 6.0 |
| Length per roll: | 3 metres |
| Temperature range: | -55°C to +125°C |
| Shrink temperature: | +70°C |
| Material: | Cross-linked polyolefin |
| With adhesive: | Yes |
| UV-resistant: | Yes |
| Standard: | RoHS |
| Colour: | Transparent |
| Delivery: | 1 dispenser box |
TD47 Products Transparent heat-shrink tubing is commonly used for labelling cables, after which a transparent heat-shrink sleeve is placed over the label to protect it. This transparent heat-shrink tubing from TD47 Products falls within Class H-5, which means there is adhesive on the inside of the tubing. Thanks to the natural rubber adhesive, this results in a crystal-clear finish once the cable has been shrunk.
TD47 Products’ heat-shrink tubing is UV-resistant. Furthermore, it can be used at temperatures ranging from -55°C to +125°C.
TD47 heat-shrink tubing is supplied in a dispenser box. A separate rack is also available to hold six dispenser boxes – handy and organised on your workbench or in your van!
This size of TD47 heat-shrink tubing is ideal for pre-assembled XLR cables. Thanks to its 4:1 shrink ratio, its 24 mm unshrunk diameter fits over an XLR plug, allowing you to add company stickers or a colour-coded length indicator to pre-assembled XLR cables straight from the factory!
Of course, you can also use this to apply a heat-shrink sleeve over the label on the XLR plug.
How does the TD47 H-5 heat-shrink tubing work?
Heat the heat-shrink tubing with a heat gun. The heat causes the tubing to shrink tightly around the cable or connection, exposing the adhesive layer on the inside.
Shrinkage begins at around 70 °C. Full shrinkage is achieved at approximately 100 °C.
Move the heat gun gently and evenly back and forth whilst heating. This ensures the heat is distributed evenly and prevents localised overheating, unevenness or damage to the heat-shrink tubing.
Tip: heat the heat-shrink tubing gradually until it fits snugly and a small amount of adhesive becomes visible at the ends. This way, you know that the adhesive layer has bonded properly and you’ll achieve an optimal seal.
Would you like to order this product by the box, receive a bespoke quote, or simply check whether this is the right product for your job? Feel free to email us at [email protected]. We’d be happy to help.
All our products are covered by a warranty against manufacturing defects. Have you discovered a fault that falls under this warranty? Please get in touch with us. We’ll be happy to sort it out for you.
You have 14 days to assess your order. Is the product not what you expected, or does the colour turn out to be different after all? No problem. Returns are possible as long as the outer packaging (seal) is still unopened.
